Voltage stabilizer with PNI relay AVR M800VA, 2.2A, 480W, 800VA

No voltage fluctuations

The PNI AVR M800VA 480W Relay Voltage Stabilizer has been designed to keep the output voltage as stable as possible. When the voltage from the mains has fluctuations, the PNI AVR M800VA will automatically adjust the voltage to the normal value.

Depending on their capacity, PNI stabilizers have a wide range of applications: electronic appliances, household appliances, air conditioners, power tools, refrigerators and in general, electronics that need stable voltage.

How does it work?

When the unit measuring the input voltage detects a variation outside the preset range, it will send a signal to the control unit. The secondary voltage transformer will change the polarity and magnitude of the compensation voltage, and control the output voltage within the preset range.

Copper coil is the basic component of voltage stabilizer. PNI AVR M800VA 480W Relay Voltage Stabilizer uses high-quality pure copper.  Thus, the coil has a longer service life and higher efficiency.

Maximum load supported

The maximum load supported by the PNI AVR M800VA voltage stabilizer is 480W 2.2A.

The stabilizer's 480W 2.2A capacity allows you to connect household appliances, including TVs, printers, microwave ovens, fans, and more.

Caution: Do not connect consumers with loads exceeding the power of the stabilizer. For example, motor/compressor electronics can have 2-6 times more power at start-up. Choose the stabilizer, taking this into account.

Essential functions

In the nominal voltage range ±25% 50/60Hz, the PNI stabilizer provides 100% power per output. Outside this range, the output power should be according to the accompanying diagram.

Important functions: 

• time-delay - 6 or 180 seconds;
• automatic overvoltage and undervoltage protection (180V - 250V);
• overload/overtemperature protection;
• automatic adaptation to the input frequency (50 / 60 Hz).