Three-phase voltage stabilizer PNI SVT-100K with servomotor 100KVA 80KW output 380V
Why choose PNI SVT-100K?Apparent power up to 100 kVA/80 kW – suitable for three-phase installations with high power requirements. Input range 280–520 V – can compensate for wide variations in supply voltage within the permissible range Stabilized output at 400 V ±3% – contributes to a more constant power supply to three-phase consumers. Fast correction – adjustment time is a maximum of 1 second for input voltage fluctuations of less than 10%. | Where can you use it?High-power three-phase electrical installations; Commercial spaces with multiple electrical consumers; Workshops and production units; Installations with professional equipment sensitive to voltage fluctuations; Applications where active power up to 80 kW is required, under the conditions specified by the manufacturer; |
High-power three-phase stabilization for professional equipment and installationsPNI SVT-100K is a three-phase voltage stabilizer with servomotor , intended for installations where network variations can affect the operation of electrical equipment. With a maximum apparent power of 100 kVA and a maximum recommended active power of 80 kW at a power factor of 0.8, it can take on important loads, maintaining the output voltage within controlled limits. It has a declared efficiency of 98% , which limits the stabilizer's own losses during voltage conversion and regulation. | |
Automatic voltage regulation by servomotorThe PNI SVT-100K uses a servomotor and toroidal transformer regulation system. When the supply voltage varies, the mechanism automatically corrects the voltage value to maintain the output within the specified range. For input voltage variations of less than 10%, the regulation time is no more than 1 second, and the declared regulation accuracy is better than ±2%. With the PNI SVT-100K stabilizer, connected equipment receives a more stable voltage even when the electrical network fluctuates. | |
100 kVA power for demanding applicationsThis capacity recommends it for three-phase installations in which several equipment or high-power consumers operate simultaneously, provided that the stabilizer is correctly sized according to the type of load. In the case of inductive consumers or electric motors, the high starting current must be taken into account. For this reason, we recommend that for loads such as motors and other equipment with high starting current, choosing a capacity of more than 3 times higher, and for certain inductive loads, the sizing may require a coefficient of 3 to 5 times the declared active power of the consumer. | |
Wide input voltage range: 280–520 VThe stabilizer accepts a three-phase input voltage between 280 V and 520 V, at a frequency of 50/60 Hz. The power supply requires a three-phase + neutral + earth connection. Connection to the neutral conductor and the earthing system is mandatory. The neutral conductor cannot replace the protective conductor. The stabilizer can compensate for significant network variations, as long as the supply voltage remains within the permissible range. | |
Multiple protectionsThe PNI SVT-100K integrates several important protection functions for the operation of a high-power installation: • undervoltage protection; • overvoltage protection; • overheating protection; • overload protection; • short circuit protection. In the event of an output overvoltage condition, the stabilizer can automatically cut off the output voltage to protect the powered equipment. The installation benefits from multiple levels of protection against electrical conditions that may affect connected consumers. |




