Tehnoturg shop is OPEN!

iProtect 1217 Detector of mobile and wireless signals, 26 bands

Availability: On order
Delivery time: 14 - 30 working days
SKU
DSL10
€3,300.00
Add to Wish List
Monthly payment from €97.92

Main Features

  • Able to detect mobile and wireless signals at a much greater distance compared to conventional RF detectors (at least,10 times more)
  • Selective: interference resistant and with a high sensitivity
  • Has worldwide coverage of mobile standards – can detect all existing bands of GSM, CDMA, 3G, 4G/LTE and 5G in the range up to 6 GHz
  • Able to detect all types of wireless signals,including Wi-Fi 2.4 GHz, Bluetooth, Wi-Fi 5 GHz, DECT, ISM 434MHz, ISM 968 MHz and ISM 915 MHz
  • Detection of at least 26 mobile and wireless bands
  • Can be adjusted to the frequency allocation of the country of use
  • A selective multi-band principle of work informs the user of exactly which signals were found
  • The mode of analysis of a certain band facilitates the physical search of a transmitter
  • A separate mode for the detection of GPS trackers with history accumulation (TRACKER)
  • ALARM function warns the operator about exceeding the threshold, both with sound and visually
  • 43 threshold levels for setting optimal sensitivity
  • Can be set up for specific tasks, for example, for the detection of Wi-Fi only, etc.
  • Operation modes:
    • ALL BANDS (detection on all bands)
    • GROUP (detection on the selected group of bands)
    • BAND (analysis of a separate band)
    • TRACKER (detection of GPS trackers)
  • Two antenna inputs and two antennas in the set for ensuring maximum sensitivity
  • The high-band directional antenna facilitates locating of transmitters above 2400 MHz
  • The built-in rechargeable battery provides an operational time of up to 5 hours
  • USB recharging

Specification

    • Number of bands: 26
    • Antenna inputs:
      • Input 1: SMA, 2400 – 6000 MHz
      • Input 2: SMA, 600 - 2400 MHz
    • Operation modes:
      ✦ALL BANDS (detection on all bands)
      ✦GROUP (detection on the selected group of bands)
      ✦BAND (analysis of a separate band)
      ✦TRACKER (detection of GPS trackers)
    • Alarm function: Visual or audio
    • Number of alarm threshold levels: 43
    • Sound signals: Alarm, depression of buttons
    • Regions:
      ✦US (bands of the USA)
      ✦EU (European bands)
      ✦TOTAL (all bands)
    • Operating and control elements:
      ✦Joystick: move left-right, up-down, threshold adjustment, mode selection
      ✦Button POWER OFF: switch off
      ✦Button POWER ON: switch on
      ✦Button ALARM: alarm
      ✦Button AUDIO: sound
      ✦Button BANDS: band set up
      ✦Button BACK: exit to the previous mode
      ✦Button SAVE (storing the current state)
    • Power supply source: USB 5V
    • Power: Built-in rechargeable battery 6800 mA*h 3.7 V
    • Battery operational resource: Up to 5 hours
    • Mass:
      ✦ The device without antenna: 750 g
      ✦ Packed: 1500 g
    • Dimensions:
      ✦ The device without antenna: 208 x 86 x 41mm
      ✦ Packed: 27 x 22 x 10 cm
    • Operating temperature range: -5...50 °C

 

Supplied set

    • Device
    • High-band antenna Micro-Pointer LPDA-12
    • Low-band rod antenna
    • Charging cable USB Type C
    • 2 x Angle adapter SMA
    • A case for transportation
    • User’s Manual
More Information
Choose brand Digiscan Labs

Sending authentication request to phone

Verification code:

Make sure that the verification code sent to the application matches the code on the screen and then enter Smart-ID PIN1

Waiting for Smart-ID reply