PNI SVM1000VA voltage stabilizer with servomotor, 800W, 3.6A, 230V output

Easily solve the problem of unstable voltage in your home

The single-phase voltage stabilizer with PNI SVM1000VA servo motor has been designed to keep the output voltage as stable as possible. When the voltage from the public grid fluctuates, the stabilizer will automatically adjust the voltage as close as possible to the preset value.

Servo motor voltage stabilizers have large capacity, high efficiency, no wave distortion, automatic voltage regulation, long service life and performance.

Servo motor voltage stabilizers have a wide range of applications. Depending on their capacity, they can connect: electromechanical equipment, industrial equipment, air conditioners, televisions, household appliances, power tools, refrigerators and, in general, electronics that need stable voltage.

Principle of operation

When the unit measuring the input voltage detects a variation outside the preset range, it will send a signal to the control unit that will activate the servo motor. The secondary voltage transformer will change the polarity and magnitude of the compensating voltage and control the output voltage within the preset range.

Copper coil: The coil is the basic component of the voltage stabilizer. The single-phase voltage stabilizer with PNI SVM1000VA  servo motor uses high-quality pure copper. Thus, the coil has a longer service life and higher efficiency.

3 x 230V sockets

The two EU sockets on the front panel and the one on the rear panel have undergone several connection tests to ensure that your home appliances can be used safely.

The maximum load supported by the PNI SVM1000VA voltage stabilizer is 800W 3.6A. The 800W 3.6A capacity of the stabilizer allows you to connect household appliances, including TVs, printers, microwaves, fans, and more.

Protection features

Vents on both sides efficiently disperse the heat generated in the conversion process. If there is an overload or short circuit, the built-in circuit breaker will cut off the current flow to protect your devices and then resume operation after giving you one minute to reduce the electrical load.

Other protections: start-up delay, mechanical error, overcurrent, short circuit, overtemperature.