Magnum AV-1KM CB6PIN 48PRO/78PRO Handsfree Kit compatible with Midland CB Radios using a 6-Pin connector

HandFree Kit for Midland CB Radio´s using a 6-Pin Mic Connector.
• Great for use in a excavator, crane, shovel, caterpillar or other machine 
• Use switch on joy-stick or foot switch to switch from RX to TX
• Connect the 2 wires from any switch to the terminal block
• Handsfree kit is powered from the transceiver through the microphone cable, no seperate DC power needed. Fused in the transceiver.
• Easy installation

Other cb brands and models
... that use same pin configuration
... that have audio without microphone plugged in
... that also have 12 Volt on Pin-6 (several brands use Pin-6 as hook lock - that will not function )
will ave same result.

FEATURES:
• HandFree Kit for many CB Radio´s using a 6-Pin Mic Connector.
• Great for use in a excavator, crane, shovel, caterpillar or other machine 
• Use switch on joy-stick or foot switch to switch from RX to TX
• Connect the 2 wires from any switch to the terminal block
• Handsfree kit is powered from the transceiver through the microphone cable,  no seperate DC power needed. Fused in the transceiver
• Easy installation
• For best result, install the wind cap on the microphone

CAUTION:
• If  the microphone mounts under the bulkhead bolt of the sun visor. Please make sure it is firmly attached and cable is safely routed.
• Please also make sure that the microphone is angled so it does not interface with your forward vision.

PACKING INCLUDES:
1 pc of Hands Free Kit