Tehnoturg kauplus on avatud E-R 10-17!

Yaesu G-1000DXC antenni rotaator, kontroller komplektis

Saadavus: Tellimisel
Tarneaeg: 14 - 30 tööpäeva
636,90 €
Lisa soovinimekirja
This new, high-performance rotator is ideal for heavy-duty applications. Its slim-line constructions is ideal for many crank-up tower installations. Rotation range: 450, with presets. Compass Display Stop may be set at North or South.Preset Control For hands-free rotation during busy operating sessions.Variable Speed 40 - 100 seconds for 360º of rotation. Specifications Power Supply Voltage: 117 VAC, 50-60 Hz Power Supply Current Consumption: 1.0 Amp Rotor Voltage: 11-24 VDC Cable Conductors Required: 6 360 Rotation Time (Non Loaded): 100 10 sec 0 40 5 sec (Variable) Rotation Range: 450 3 Rotation Torque: 43-79 Ft. Lbs. (600 to 1,100 kgf-cm) Braking Torque: 6000 kgf-cm Maximum Vertical Load: 440 Lbs. (200 kg) continuous   1320 Lbs. (800 kg) momentary Mast Outside Diameter: 1.5 to 2.5 inches (38 to 63 mm) Braking Type: Mechanical and Electrical stoppers Antenna K Coefficient: 230 or less Wind Loading Area: (Pole Type) 0.75 m2 (Tower Type) 2.2 m2 Maximum Continuous Duty: 3 minutes Operating Temperature Range: 0C to +40C (Controller)   -20C to +40C (Rotator) Rotator Dimension: 7.5 inches diameter 12.5 inches high (186 x 300 mm) Rotator Weight: 7.7 Lbs. (3.6 kg) Controller Dimension (WHD): 200 x 130 x 193 mm Controller Weight: Approx. 2.8 kg 0 Specifications are subject to change without notice.
Vali bränd Yaesu

Sending authentication request to phone


Veenduge, et rakendusele saadetud kontrollkood ühtib ekraanil kuvatud koodiga ning sisestage Smart-ID PIN1

Smart-ID vastuse ootamine