Et teid paremini teenindada, siis kasutame küpsiseid. Kasutamist jätkates nõustute küpsiste ja veebilehe üldtingimustega. Lisateave.
Alumiinium Teleskoop Mast 12,8m / 1,95m
Saadavus: TellimiselTarneaeg: 14 - 30 tööpäeva
The telescopic masts are manufactured from sideways slotted aluminum tubes; the mast can be extended to any length and securely locks into place by means of a massive clamp. The maximum allowed extended length is marked by a color ring approx. 20cm before the end of each tube. There is no fixed stop which makes it advisable to approach the marking slowly when extending the telescopes. These masts are ideally suited for portable applications due to the low weight and the telescopic mechanism. When setting up the mast please pay special attention to the clamping length; the clamping length of the mast must be at least 1/6th of the extended length, or at least 1 meter at the minimum. When extending the mast more than 6 meters measured from the uppermost clamping point additional guys are mandatory. The tubes are made of weather-proof aluminum alloy. The tubes are tapered by 5 mm and the tube thickness is 2mm. Please refer to the following table for weight and dimensions. The stated additional forces refer to a horizontally applied force at the tip of the extended mast - without guys and a mast clamping length of 1/6th. The calculation includes the inherent load at a wind speed of 50km/h (which is equivalent to a wind force of 7).