Tehnoturg kauplus on avatud E-R 10-17!

Scan-Antenna Extendr® 2A - kleebitav multiband andmeside ja GNSS antenn

Saadavus: Tellimisel
Tarneaeg: 14 - 30 tööpäeva
48,00 €
Lisa soovinimekirja

Extendr® 2A - Adhesive

High performance multiband cellular and GNSS antenna with extended range

Rugged tamper-proof multiband antenna combining all major cellular bands and 4 GNSS applications. The antenna is ideal for fleet management, IoT and M2M applications providing a stable connection in critical areas. The Extendr® antenna family offers multiple mounting options. The antenna is offered with customer specified cables and connectors.

  • 9 celluar bands and 4 GNSS in one installation
  • IP67 water proof design for professional use
  • Low profile design
  • Ground plane independent
  • Easy installation with adhesive tape
Electrical Specifications:
Frequency790 - 2690 MHz, 1561.1 - 1605.4 MHz (LTE800/1800/2600, GSM850/900/1800, PCS/DECT1900, UMTS900/2100, GNSS)
Impedance50 Ohm
VSWR< 3.0:1 (790-2100 MHz), < 1.5:1 (2500-2690 MHz)
Satellite SystemGLONASS, GPS, Galileo and BeiDou
GAIN1 dBd, 3.1 dBi (790-960 MHz, 1710-2170 MHz)
3 dBd, 5.1 dBi (2500-2690 MHz)
Max. Input Power10 W
LNA Gain26 dB (GNSS)
Noise Figure1.35 dB (GNSS)
Supply voltage3 - 5.5 V DC (Fed via cable) (GNSS)
Current consumption, average20 mA (GNSS)
Antistatic ProtectionDirect Ground (DC-short)
Mechanical Specifications:
Height46 mm (Above surface when mounted)
Weight50 g
DiameterØ 111 mm
MountingWith double sided adhesive tape
Mounting placeOn vertical or horizontal surfaces (conductive or non-conductive)
MaterialsABS, silicon, brass and PCB
ConnectorLTE/GSM/UMTS (Red): SMA-male (Other types available)
Connector 2GNSS (Blue): SMA-male (Other types available)
CableRG174/U, 1.5 m (Other cable lengths available)
Ingress ProtectionIP67
Ordering information:
P/N48022-000 (1.5 m cable + SMA-male - Bulk packing)
P/N48022-001 (1.5 m cable + SMA-male - In polybag)
Vali bränd Scan-Antenna
Antenni kasutusala 3G 900, 4G, 868Mhz, GPRS, GPS, GSM, IoT, M2M, Outdoor, RFID

Sending authentication request to phone


Veenduge, et rakendusele saadetud kontrollkood ühtib ekraanil kuvatud koodiga ning sisestage Smart-ID PIN1

Smart-ID vastuse ootamine